View 4135_1156807.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Product Specification
PE4135
Product Description
The PE4135 is a high linearity passive Quad MOSFET Mixer for GSM800 & Cellular Base Station Receivers, exhibiting high dynamic range performance over a broad LO drive range of up to 20 dBm. This mixer integrates passive matching networks to provide single-ended interfaces for the RF and LO ports, eliminating the need for external RF baluns or matching networks. The PE4135 is optimized for frequency downconversion using low-side LO injection for GSM800 & Cellular Base Station application, and is also suitable for up-conversion applications. The PE4135 is manufactured on Peregrine's UltraCMOSTM process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Figure 1. Functional Diagram High Linearity UltraCMOSTM Quad MOSFET Mixer Features
* Integrated, single-ended RF & LO
interfaces
* High linearity: Typical IIP3 at 32dBm
820 - 920 MHz (+17 dBm LO)
* Low conversion loss: 6.8 dB
(+17 dBm LO)
* High isolation: Typical LO-IF at 42 dB,
LO-RF at 32 dB
* Small 6-lead 3x3 mm DFN package
Figure 2. Package Type
6-lead DFN
LO
180o Two-Way Power Divider
IF
RF
180o Two-Way Power Divider
Table 1. Electrical Specifications @ +25 C
Parameter1
Frequency Range: LO RF IF2 Conversion Loss3 Isolation: LO-RF LO-IF Input IP3 Input 1 dB Compression Notes: 30 40 29
Minimum
750 820 --
Typical
--70 6.8 32 42 32 21
Maximum
850 920 -7.3
Units
MHz MHz MHz dB dB dB dBm dBm
1. Test conditions unless otherwise noted: IF = 70 MHz, LO input drive = 17 dBm, RF input drive = 3 dBm. 2. An IF frequency of 70 MHz is a nominal frequency. The IF frequency can be specified by the user as long as the RF and LO frequencies are within the specified maximum and minimum. 3. Conversion Loss includes loss of IF transformer (M/A COM ETC1-1-13, nominal loss 0.7 dB at 70 MHz).
Document No. 70-0086-04 www.psemi.com
(c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 9
PE4135
Product Specification
Figure 3. Pin Configuration (Top View)
Table 3. Absolute Maximum Ratings
Symbol
TST
Parameter/Conditions
Storage temperature range Operating temperature range LO input power RF input power ESD Sensitive Device
Min
-65 -40
Max
150 85 20 12 250
Units
C C dBm dBm V
IF1 GND LO
1 2 3
6 5 4
IF2
TOP
GND
PLO PRF VESD
PE4135
RF
Table 2. Pin Descriptions
Pin No.
1 2
Pin Name
IF1 GND
Description
IF differential output. Ground connections for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. The exposed solder pad must also be soldered to the ground plane for best performance. LO Input. RF Input. Ground connections for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. The exposed solder pad must also be soldered to the ground plane for best performance. IF differential output.
Absolute Maximum Ratings are those values listed in the above table. Exceeding these values may cause permanent device damage. Functional operation should be restricted to the limits in the DC Electrical Specifications table. Exposure to absolute maximum ratings for extended periods may affect device reliability. Electrostatic Discharge (ESD) Precautions When handling this UltraCMOSTM device, observe the same precautions that you would use with other ESD-sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the rating specified in Table 3. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOSTM devices are immune to latch-up.
3 4 5
LO RF GND
6
IF2
Document No. 70-0086-04 www.psemi.com
(c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 2 of 9
PE4135
Product Specification
Evaluation Kit
Figure 4. Evaluation Board Layout Pin 1 Table 4. Bill of Materials
Reference
T2 R1 U1 J1, J2, J3
Value / Description
M/A Com ETK1-1-13 0 PE4135 MLP Mixer SMA Connector
Figure 5. Evaluation Board Schematic
3
2 6-lead MLPM
3 x 3 mm
1
LO RF
T2
IF
6
4
5
Figure 6. Evaluation Board Testing Block Diagram, 2-Tone Setup
4135 PA
3 dB
Sig Gen
LO
Eval Board
IF
3 dB
RF
3 dB
Spectrum Analyzer
Sig Gen
6 dB
Hybrid Tee
6 dB
Sig Gen
(c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 9
Document No. 70-0086-04 UltraCMOSTM RFIC Solutions
PE4135
Product Specification
Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=70 MHz) Figure 7. Conversion Loss Figure 8. Input 1dB Compression
0
25
-2 1dB Compression (dB)
20
Conversion Loss (dB)
85 C 15
25 C
-40 C
-4
-6
10
-8 85 C -10 800 25 C -40 C
5
825
850
875 Frequency (MHz)
900
925
950
0 800
850 Frequency (MHz)
900
950
Figure 9. Input IP3 @ 25 C
Figure 10. Output IP3
40 35
30
25
30 25
20 OIP3 (dBm) 858C 15 258C -408C
IIP3 (dBm)
20 15 10 5 0 800
10
5
825
850
875 Frequency (MHz)
900
925
950
0 800
825
850
875 Frequency (MHz)
900
925
950
Document No. 70-0086-04 www.psemi.com
(c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 4 of 9
PE4135
Product Specification
Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=70 MHz) Figure 11. LO-IF Isolation Figure 12. LO-RF Isolation
0
0
-10
-10 LO-RF Isolation (dB)
LO-IF Isolation (dB)
-20
-20
-30
-30
-40
-50 -40 C -60 800 825 850 875 Frequency (MHz) 900 25 C 85 C 925 950
-40 -40 C -50 800 25 C 85 C
825
850
875 Frequency (MHz)
900
925
950
Figure 13. LO Port Return Loss @ 25C
Figure 14. RF Port Return Loss @ 25C
0
0
-5
-5 Return Loss (dB)
Return Loss (dB) -10
-10
-15
-20
-15
-25
-20 200
400
600
800
1000
1200
1400
-30 200
400
600
800
1000
1200
1400
Frequency (MHz)
Frequency (MHz)
(c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 9
Document No. 70-0086-04 UltraCMOSTM RFIC Solutions
PE4135
Product Specification
Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=70 MHz) Figure 15. Input IP3 Across LO Power Figure 16. Conversion Loss Across LO Power
35
LO=20dBm
-6
LO=14dBm
LO=20dBm
LO=17dBm
30
LO=14dBm
LO=17dBm
-8 LO=11dBm
LO=11dBm
Conversion Loss (dB)
Input IP3 (dBm)
25 LO=8dBm 20 LO=5dBm 15
LO=8dBm -10 LO=5dBm
-12
-14
10 800 850 Frequency (MHz) 900 950
800
850 Frequency (MHz)
900
950
Table 5. Spurious Response
mRF+nLO nLO mRF 1 2 3 4
1 1 50 69 88 2 29 46 81 85 3 20 58 70 83 4 32 50 77 >90
Table 6. Spurious Response
mRF+nLO nLO mRF 1 2 3 4
1 0 47 66 86 2 27 53 66 83 3 12 47 62 >90 4 35 50 67 >90
Note: Normalized to dB below PIF (RF=870 Mhz @ 3 dBm, LO=940 MHz @ 17 dBm)
Note: Normalized to dB below PIF (RF=870 Mhz @ 3 dBm, LO=940 MHz @ 17 dBm)
(c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 6 of 9
Document No. 70-0086-04 UltraCMOSTM RFIC Solutions
PE4135
Product Specification
Figure 17. Package Drawing
6-lead DFN
3.00 C L
-A-B4
6 0.125
5
C L PIN MAR 1 K 0.10 C 1 4 0.10 C 2 3
3.00
4
0.125
10+2 -10 0.100 C
TOP VIEW
DETAIL C 0.025 0.025
0.90 0.10 0.080 C 3 0.0250.025 SIDE VIEW SEE DETAIL B
0.70 0.05 0.20 0.05 SEATING PLANE -CDETAIL B
C L 0.95 EXPOSED PAD 1 2 3
0.35
+0.08 -0.02 0.10 0.05 C
0.17 MIN. CAB 0.29 +0.21 -0.08 EXPOSED SLUG/ HEAT SINK 0.24 +0.20 -0.08 0.125 0.17 0.30
SEE DETAIL A R 0.15 TYP
R0.127 TYP 1.21 0.10 0.605 0.05 THIS FEATURE APPLIES TO BOTH ENDS OF THE PKG. DETAIL A EXPOSED METALIZED FEATURE EDGE OF PLASTIC BODY
EXPOSED (2X)
6
5
4
3 1.050.05 2.010.10
.20 MIN.
BOTTOM VIEW 1. DIMENSIONS AND TOLERANCES ARE PER ANSi Y14.5 2. DIMENSIONS ARE IN MILLIMETERS, ANGLES ARE IN DEGREES. 3 4 COPLANARITY APPLIES TO EXPOSED HEAT SLUG AS WELL AS THE TERMINALS. PROFILE TOLERANCE APPLIES TO PLASTIC BODY ONLY.
Document No. 70-0086-04 www.psemi.com
(c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 9
PE4135
Product Specification
Figure 18. Tape and Reel Specifications
6-lead DFN
Table 7. Dimensions
Dimension
Ao Bo Ko P W T R7 Quantity R13 Quantity
DFN 3x3 mm
3.23 0.1 3.17 0.1 1.37 0.1 4 0.1 8 +0.3, -0.1 0.254 0.02 3000 N.A.
Note: R7 = 7 inch Lock Reel, R13 = 13 inch Lock Reel
Table 8. Ordering Information
Order Code
4135-01 4135-02 4135-00 4135-51 4135-52
Part Marking
4135 4135 PE4135-EK 4135 4135
Description
PE4135-06DFN 3x3mm-12800F PE4135-06DFN 3x3mm-3000C PE4135-06DFN 3x3mm-EK PE4135G-06DFN 3x3mm-12800F PE4135G-06DFN 3x3mm-3000C
Package
6-lead 3x3 mm DFN 6-lead 3x3 mm DFN Evaluation Kit Green 6-lead 3x3 mm DFN Green 6-lead 3x3 mm DFN
Shipping Method
12800 units / Canister 3000 units / T&R 1 / Box 12800 units / Canister 3000 units / T&R
(c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 8 of 9
Document No. 70-0086-04 UltraCMOSTM RFIC Solutions
PE4135
Product Specification
Sales Offices
The Americas Peregrine Semiconductor Corp.
9450 Carroll Park Drive San Diego, CA 92121 Tel 858-731-9400 Fax 858-731-9499
North Asia Pacific Peregrine Semiconductor K.K.
5A-5, 5F Imperial Tower 1-1-1 Uchisaiwaicho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213
Europe Peregrine Semiconductor Europe
Commercial Products: Batiment Maine 13-15 rue des Quatre Vents F- 92380 Garches, France Tel: +33-1-47-41-91-73 Fax : +33-1-47-41-91-73 Space and Defense Products: 180 Rue Jean de Guiramand 13852 Aix-En-Provence cedex 3, France Tel: +33(0) 4 4239 3361 Fax: +33(0) 4 4239 7227
South Asia Pacific Peregrine Semiconductor
28G, Times Square, No. 500 Zhangyang Road, Shanghai, 200122, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652
For a list of representatives in your area, please refer to our Web site at: www.psemi.com
Data Sheet Identification
Advance Information
The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user's own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine's products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS is a trademark of Peregrine Semiconductor Corp.
Preliminary Specification
The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product.
Product Specification
The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a DCN (Document Change Notice).
Document No. 70-0086-04 www.psemi.com
(c)2005 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 9

▲Up To Search▲

Price & Availability of 4135

	To Download 4135 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .